todo

kernel flash weil 2.6.25 ist zu alt
sicherung
home
alte etc
drives
eine USb ist ja ok, aber die 2. für das backup will ich nicht hinter den hub hängen (auserdem gern in einen andern Raum)
config
/srv/smb/

Router

und eine Fritzbox als Router und ..

DECT
USB-SMB-Storage
AVM Fritz!box Fon WLAN 7390?
Voip-Anlage AVM Fritz!box 7270 Fritzbox

oder

sheva macht dann nur das backup und den nerdkram (conr etc)

project

alles auf ethernetkabel (kill BNC) OK und stabil
erst mal nur backup auf externer Platte (oder gleich übers netzwerk)
smb drive auf externe platte
sheeva anschalten
oder rsync/backup auf einem desktoprechner

system

root@debian:~# cat /etc/debian_version 5.0

root@debian:~# df Filesystem 1K-blocks Used Available Use% Mounted on rootfs 519168 148760 370408 29% / tmpfs 257816 0 257816 0% /lib/init/rw varrun 257816 36 257780 1% /var/run varlock 257816 0 257816 0% /var/lock udev 257816 4 257812 1% /dev tmpfs 257816 0 257816 0% /dev/shm tmpfs 257816 0 257816 0% /var/cache/apt

sys

root@debian:~# syslog-facility syslog-facility - Copyright (c) 1998 Hertzog Rapha?l Usage : /usr/sbin/syslog-facility set <set_of_priority> <logfile> ... it returns the 'LOCALx' string you have the right to use. /usr/sbin/syslog-facility remove <facility> Example: /usr/sbin/syslog-facility set all /var/log/all /usr/sbin/syslog-facility set all\;!=info /var/log/all-without-info /usr/sbin/syslog-facility set =err /var/log/errors =warning /var/log/warn /usr/sbin/syslog-facility remove LOCAL1 root@debian:~# dmesg Linux version 2.6.22.18 (dhaval@devbox) (gcc version 4.2.1) #1 Thu Mar 19 14:46:22 IST 2009 CPU: ARM926EJ-S [56251311] revision 1 (ARMv5TE), cr=00053177 Machine: Feroceon-KW Using UBoot passing parameters structure Memory policy: ECC disabled, Data cache writeback On node 0 totalpages: 131072 DMA zone: 1024 pages used for memmap DMA zone: 0 pages reserved DMA zone: 130048 pages, LIFO batch:31 Normal zone: 0 pages used for memmap CPU0: D VIVT write-back cache CPU0: I cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets CPU0: D cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets Built 1 zonelists. Total pages: 130048 Kernel command line: console=ttyS0,115200 mtdparts=nand_mtd:0x400000@0x100000(uImage),0x1fb00000@0x500000(rootfs) rw root=/dev/mtdblock1 rw ip=10.4.50.4:10.4.50.5:10.4.50.5:255.255.255.0:DB88FXX81:eth0:none PID hash table entries: 2048 (order: 11, 8192 bytes) Console: colour dummy device 80x30 Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 256MB 256MB 0MB 0MB = 512MB total Memory: 515456KB available (3864K code, 257K data, 104K init) Calibrating delay loop... 1192.75 BogoMIPS (lpj=5963776) Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok NET: Registered protocol family 16

CPU Interface

SDRAM_CS0 ....base 00000000, size 256MB SDRAM_CS1 ....base 10000000, size 256MB SDRAM_CS2 ....disable SDRAM_CS3 ....disable PEX0_MEM ....base e8000000, size 128MB PEX0_IO ....base f2000000, size 1MB INTER_REGS ....base f1000000, size 1MB NFLASH_CS ....base fa000000, size 2MB SPI_CS ....base f4000000, size 16MB BOOT_ROM_CS ....no such DEV_BOOTCS ....no such CRYPT_ENG ....base f0000000, size 2MB

Marvell Development Board (LSP Version KW_LSP_4.2.7_patch2)-- SHEEVA PLUG Soc: MV88F6281 Rev 3 LE

Detected Tclk 200000000 and SysClk 400000000 MV Buttons Device Load Marvell USB EHCI Host controller #0: c08b8600 PEX0 interface detected no Link. PCI: bus0: Fast back to back transfers enabled SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb NET: Registered protocol family 2 Time: kw_clocksource clocksource has been installed. IP route cache hash table entries: 16384 (order: 4, 65536 bytes) TCP established hash table entries: 65536 (order: 7, 524288 bytes) TCP bind hash table entries: 65536 (order: 6, 262144 bytes) TCP: Hash tables configured (established 65536 bind 65536) TCP reno registered RTC registered Use the XOR engines (acceleration) for enhancing the following functions: o RAID 5 Xor calculation o kernel memcpy o kenrel memzero Number of XOR engines to use: 4 cesadev_init(c000c894) mvCesaInit: sessions=640, queue=64, pSram=f0000000 Warning: TS unit is powered off. MV Buttons Driver Load NTFS driver 2.1.28 [Flags: R/O]. JFFS2 version 2.2. (NAND) Â?? 2001-2006 Red Hat, Inc. io scheduler noop registered io scheduler anticipatory registered (default) Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33) is a 16550A serial8250.0: ttyS1 at MMIO 0xf1012100 (irq = 34) is a 16550A Loading Marvell Ethernet Driver: o Cached descriptors in DRAM o DRAM SW cache-coherency o Single RX Queue support - ETH_DEF_RXQ=0 o Single TX Queue support - ETH_DEF_TXQ=0 o TCP segmentation offload enabled o Receive checksum offload enabled o Transmit checksum offload enabled o Network Fast Processing (Routing) supported o Driver ERROR statistics enabled o Driver INFO statistics enabled o Proc tool API enabled o Rx descripors: q0=128 o Tx descripors: q0=532 o Loading network interface(s): o eth0, ifindex = 1, GbE port = 0 o eth1, ifindex = 2, GbE port = 1

mvFpRuleDb (dfd00000): 16384 entries, 65536 bytes Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI Copyright (c) 1999-2006 Intel Corporation. e100: Intel(R) PRO/100 Network Driver, 3.5.17-k4-NAPI e100: Copyright(c) 1999-2006 Intel Corporation Integrated Sata device found scsi0 : Marvell SCSI to SATA adapter scsi1 : Marvell SCSI to SATA adapter NFTL driver: nftlcore.c $Revision: 1.98 $, nftlmount.c $Revision: 1.41 $ NAND device: Manufacturer ID: 0xec, Chip ID: 0xdc (Samsung NAND 512MiB 3,3V 8-bit) Scanning device for bad blocks 2 cmdlinepart partitions found on MTD device nand_mtd Using command line partition definition Creating 2 MTD partitions on "nand_mtd": 0x00100000-0x00500000 : "uImage" 0x00500000-0x20000000 : "rootfs" ehci_marvell ehci_marvell.70059: Marvell Orion EHCI ehci_marvell ehci_marvell.70059: new USB bus registered, assigned bus number 1 ehci_marvell ehci_marvell.70059: irq 19, io base 0xf1050100 ehci_marvell ehci_marvell.70059: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver USB Universal Host Controller Interface driver v3.0 usbcore: registered new interface driver usblp drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. mice: PS/2 mouse device common for all mice i2c /dev entries driver Linux telephony interface: v1.00 Marvell Telephony Driver: mvBoardVoiceAssembleModeGet: TDM not supported(boardId=0x9) assembly=-1,irq=-1 mp_check_config: Error, invalid voice assembley mode md: linear personality registered for level -1 md: raid0 personality registered for level 0 md: raid1 personality registered for level 1 raid6: int32x1 97 MB/s raid6: int32x2 114 MB/s raid6: int32x4 122 MB/s raid6: int32x8 110 MB/s raid6: using algorithm int32x4 (122 MB/s) md: raid6 personality registered for level 6 md: raid5 personality registered for level 5 md: raid4 personality registered for level 4 raid5: measuring checksumming speed arm4regs : 1071.600 MB/sec 8regs : 754.800 MB/sec 32regs : 899.600 MB/sec raid5: using function: arm4regs (1071.600 MB/sec) device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com dm_crypt using the OCF package. sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman mvsdmmc: irq =28 start f1090000 mvsdmmc: no IRQ detect usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver Advanced Linux Sound Architecture Driver Version 1.0.14 (Thu May 31 09:03:25 2007 UTC). mvCLAudioCodecRegGet: Error while reading register! mvCLAudioCodecInit: Error - Invalid Cirrus Logic chip/rev ID! Error - Cannot initialize audio decoder.at address =0xff<6>ALSA device list: #0: Marvell mv88fx_snd ALSA driver TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 eth0: started IP-Config: Complete: device=eth0, addr=10.4.50.4, mask=255.255.255.0, gw=10.4.50.5, host=DB88FXX81, domain=, nis-domain=(none), bootserver=10.4.50.5, rootserver=10.4.50.5, rootpath= md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. VFS: Mounted root (jffs2 filesystem). Freeing init memory: 104K fat: exports duplicate symbol fat_add_entries (owned by kernel)

net

nameserver 192.168.1.1